Attic Insulation Calculator
Calculate how much insulation to add to your attic for optimal efficiency
sq ft
R
R
Additional Depth Needed
7.3 in
Total Insulation Depth10.3 in
Bags / Bundles Needed17
Estimated Material + Labor$1,279
Link copied to clipboard
How to Use the Attic Insulation Calculator
Proper roof insulation pays for itself through reduced heating and cooling bills. The Attic Insulation Calculator helps you find the right R-value for your climate zone and calculate exactly how much insulation you need.
- Find your climate zone — the DOE map divides the US into zones 1–8.
- Look up the recommended total attic R-value for your zone (R-30 to R-60 for most US homes).
- Enter your attic floor area and current insulation depth/type.
- The calculator tells you how much additional insulation to add.
- Divide by coverage per bag (printed on the bag) to determine how many bags to buy.
Formula & Methodology
The Attic Insulation Calculator uses the following established formulas:
Total R-Value = Σ(R-value of each layer)
Heat Loss (BTU/hr) = Area × ΔT / R-Total
Annual Heat Loss (BTU) = Heat Loss × Hours per Heating Season
Required Depth = Target R-Value / R-value per inch of material
R-value is additive: two R-19 batts stacked give R-38. Different materials have different R-values per inch.
Frequently Asked Questions
The US DOE recommends R-38 to R-60 for attics in most climate zones. Zone 1 (hot climates like Miami) needs R-30, while Zone 7 (very cold like Fairbanks) needs R-60. Check EnergyStar.gov for your specific zone.
Blown-in cellulose and fiberglass are the most cost-effective for existing attics. Spray foam (closed-cell) offers the highest R-value per inch and also air-seals, but costs more. Batts work well in new construction with clear joist bays.
The EPA estimates that proper air sealing and insulation saves an average of 15 % on total heating and cooling costs — about $200–$400 per year for a typical US home. Payback periods are often under 5 years.