Radiant Barrier Calculator
Calculate energy savings from installing a radiant barrier in your attic
sq ft
$/yr
Estimated Cooling Reduction
17.0%
Annual Dollar Savings$153
Material Cost$225
Installed Cost (w/ labor)$600
Simple Payback3.9
Link copied to clipboard
How to Use the Radiant Barrier Calculator
Proper roof insulation pays for itself through reduced heating and cooling bills. The Radiant Barrier Calculator helps you find the right R-value for your climate zone and calculate exactly how much insulation you need.
- Find your climate zone — the DOE map divides the US into zones 1–8.
- Look up the recommended total attic R-value for your zone (R-30 to R-60 for most US homes).
- Enter your attic floor area and current insulation depth/type.
- The calculator tells you how much additional insulation to add.
- Divide by coverage per bag (printed on the bag) to determine how many bags to buy.
Formula & Methodology
The Radiant Barrier Calculator uses the following established formulas:
Total R-Value = Σ(R-value of each layer)
Heat Loss (BTU/hr) = Area × ΔT / R-Total
Annual Heat Loss (BTU) = Heat Loss × Hours per Heating Season
Required Depth = Target R-Value / R-value per inch of material
R-value is additive: two R-19 batts stacked give R-38. Different materials have different R-values per inch.
Frequently Asked Questions
The US DOE recommends R-38 to R-60 for attics in most climate zones. Zone 1 (hot climates like Miami) needs R-30, while Zone 7 (very cold like Fairbanks) needs R-60. Check EnergyStar.gov for your specific zone.
Blown-in cellulose and fiberglass are the most cost-effective for existing attics. Spray foam (closed-cell) offers the highest R-value per inch and also air-seals, but costs more. Batts work well in new construction with clear joist bays.
The EPA estimates that proper air sealing and insulation saves an average of 15 % on total heating and cooling costs — about $200–$400 per year for a typical US home. Payback periods are often under 5 years.