Rise and Run Calculator
Calculate roof rise, run, and rafter length from any two measurements
ft
ft
:12
Rafter Length
12.6 ft
Rise4.0 ft
Run12.0 ft
Pitch (:12)4.00
Angle18.4°
Link copied to clipboard
How to Use the Rise and Run Calculator
The Rise and Run Calculator converts between the three common ways to express roof slope: pitch ratio (rise:12), angle in degrees, and percentage. Use any measurement you have on hand.
- Select the input format you are starting with: rise & run, degrees, or percentage.
- Enter your known value in the field provided.
- The calculator instantly converts to all other formats.
- Use the pitch multiplier to convert footprint area to actual roof area.
- Check the recommended minimum pitch for your roofing material in the result notes.
Formula & Methodology
The Rise and Run Calculator uses the following established formulas:
Pitch Ratio = rise : 12 (e.g., 6:12)
Degrees = arctan(rise / 12) × (180 / π)
Percentage = (rise / 12) × 100
Multiplier = √(1 + (rise / 12)²)
A 6:12 pitch equals 26.57° and a 50 % slope — all three describe the same roof.
Frequently Asked Questions
Most residential roofs fall between 4:12 and 9:12 (18° – 37°). Low-slope roofs are 2:12 or less, while steep roofs are anything above 9:12. The most common pitch in the US is 6:12.
Asphalt shingles require a minimum 2:12 pitch (with modified installation) and work best at 4:12 and above. Metal roofing can go as low as 1:12 with proper seaming. Always check your material's technical data sheet.
Steeper roofs cost more because they require additional safety equipment, take longer to install, and use more material per square foot of footprint. Expect to add 10–30 % to labor costs for roofs above 7:12.