Roof Overhang Calculator
Calculate eave and rake overhang dimensions and additional area
ft
ft
ft
:12
Total Overhang Area
376 sq ft
Roof Length (incl. overhang)54.0 ft
Roof Width (incl. overhang)34.0 ft
Total Roof Footprint1,836 sq ft
Link copied to clipboard
How to Use the Roof Overhang Calculator
Using the Roof Overhang Calculator is straightforward. Gather your building measurements and roof pitch before you start — accurate inputs lead to accurate material estimates.
- Measure the exterior length and width of your building at the foundation.
- Identify your roof pitch (rise per 12 inches of run) — check your building plans or use a pitch gauge.
- Enter both measurements and pitch into the calculator above.
- Review the result: total roof surface area in square feet and roofing squares.
- Add a 10–15 % waste factor when ordering materials for a standard roof, or 15–20 % for complex roofs with many hips and valleys.
Formula & Methodology
The Roof Overhang Calculator uses the following established formulas:
Roof Area = Footprint Area × Pitch Multiplier
Pitch Multiplier = √(1 + (rise/12)²)
Footprint Area = Length × Width (including overhangs)
1 Roofing Square = 100 sq ft of roof area
The pitch multiplier accounts for the extra surface area created by the slope of the roof.
Frequently Asked Questions
Measure your building's footprint (length × width) from the ground, then multiply by the pitch multiplier for your roof slope. This gives a very accurate surface area without any ladder work. Our Roof Overhang Calculator does this calculation automatically.
A standard gable roof needs 10 % waste. Add 15 % for moderate complexity (a few hips or valleys) and up to 20 % for highly complex roofs. Always round up to the nearest bundle when ordering shingles.
One roofing square equals 100 square feet of roof surface. Roofing materials — shingles, underlayment, and insulation — are priced and sold per square, so converting your area to squares makes ordering much easier.